how do u adjust the camber on a 1990 Z71
Unloosing bolts on rim and remove tire on either side that you want to adjust. Once tire is removedyou will have access to camber. There are two bolts on the camber and you can adjust them both left or right.
Rear camber is not adjustable on a Cherokee with a solid axle.
You don't
the bolts in the upper control arm have cams on them to adjust the camber and caster.
5 inch speakers in the 96 Jag XJ6
you cant
Adding or removing the shims on the upper control arm can adjust camber and caster.
you have to grind slots in the nuckle, then slide the nuts in or outwards, depending on what type of camber you want.
bring it to a Mexican
There is no factory camber adjustment for your truck. Your best bet would be to go to Napa and buy a set of camber bolts and have them installed. Cost is about $16.
You can adjust the camber by drilling out the spotwelds on the upper strut plates. This will allow you to slide the strut plate in and out to make your adjustments. (been aligning for 13 years). You can adjust the camber by drilling out the spotwelds on the upper strut plates. This will allow you to slide the strut plate in and out to make your adjustments. (been aligning for 13 years).