there is a screw on the carb. be sure to adjust while the engine is running so you can tell by the idle when it is set properly.
its in the front of your carb. underneath the intake manifold.
twist the screw under the carb
It should be on the carb!
If you are not able to adjust it down with the idle adjust knob you may have an airleak at the carb.
there is a nob on the carb just play with it until you get it adjusted
can you tell me if you ever got a response to this, or did you ever find out how? I am trying to adjust the carb on mine and I am not real sure how?!?! Thx Russell
You're running way rich. Adjust your carb's mixture screws.
pull top off carb and adjust the needle its a peice of cake you may need to chang main and pilot jet but just mess with the needle in carb
Only adjustment on it is the fuel mixture screw (on the bottom of carb) all the other jets are fixed, and the only way to modify is to buy new jets and install them.
I assume it has carb's. If so, follow the cable to the carb's. There is a little screw you can tighten to increase the idle or lower it. Just a long screwdriver and watch the tach.
Step 1: Search for Owners Manual Step 2: Open Owners Manual to "Index" Step 3: Look for "Engine Servicing" STep 4: Follow instructions in the "Owners Manual" To Clea a carb
Factory carb settings for a 84 Honda 200s