Inspection
1. Check free play: 3/8-13/16 in (10-20 mm). If necessary, adjust to the specified range.
Upper Adjustment
Attempt adjustment with the upper clutch cable adjuster first.
1. Loosen the upper lock nut (2).
2. Tum the upper clutch cable adjuster (3) to obtain the specified free play.
3. Tighten the upper lock nut and check the free play again.
Lower Adjustment
If the upper clutch cable adjuster is threaded out near its limit - or the correct
free play cannot be obtained - attempt adjustment with the lower clutch cable
adjuster.
Loosen the upper lock nut (2) and turn the upper clutch cable adjuster (3 ) all
the way in (to provide maximum free play). Tighten the upper lock nut.
2. Loosen the lower lock nut (4 ).
3. Tum the lower adjusting nut (5 ) to obtain the specified free play.
4. Tighten the lower lock nut and check the adjustment.
5. Start the engine, pull the clutch lever in, and shift into gear. Make sure the
engine does not stall and the motorcycle does not creep. Gradually release the
clutch lever and open the throttle. Your motorcycle should move smoothly and
accelerate gradually.
If you cannot get proper adjustment, or the clutch does not work properly, the cable or clutch friction discs may be worn. See your Honda dealer or refer to the official Honda Service Manual (page 204 ).
YTX14-bs
will 750 shadow pipes fit 1300 vtx
no the 1800 is
113 mph
V Twin Extreme Retro Touring
If you use the Honda brand, you will not go wrong.
Sandra Florea I would like a Honda VTX 1300c 2006 owners manual
Two.
try this link www.vtxcafe.com it has all VTX related answers
Put a battery charger on it.
I get 43 MPG on my 2004 1300vtx
190 km/h or 118 mph.