Assuming all Trackers have a "Pull-Up" parking / Emergency brake between the seats like my '91 and '95 4WD's have:
Remove the (4) screws holding the center housing / console to the floor and pull it up and forward over the brake handle (release the brake first!). This reveals the adjuster nut that's below the parking brake handle - the threaded rod the nut is on points toward the dash... simply use a wrench (10mm? can't recall) to turn the nut clockwise to pull more of the cable into the cab. DO NOT OVERTIGHTEN or you will burn up your rear brakes. Always err on the side of slack.
In the center arm rest is a cover at the bottom that can be removed to expose the emergency brake cable, and a nut to adjust the tension.
how to adjust the emergency brake
if you want to adjust the emergency brake tension on a 1985 chevy scottsdale 10, you would have to get under the truck and take a look at your brakes. it may be that you would have to also look under the hood or ask a mechanic frien for assistance.
How do you adjust the emergency brake on your 2001 S10 Chevy?
You can adjust your 1989 Chevy Corvette emergency brake into different ways. The emergency brake will have an adjustment bolt on the brake pad. The emergency brake cable can be adjusted to shorten or lengthen the cable.
The emergency brake cable is connected to the brake shoe on the rear brakes. You can adjust the emergency brake by loosening or tightening the nut on the end of the cable.
How do I adjust my emergency brakes on my 1999 ford expidition?
The 1995 Nissan 240 emergency brake has an adjustment screw on the brake pad. Turn the adjustment screw to adjust the brake height.
The parking brake cables are located directly beneath the handle. Pull off the rubber boot. Loosen the locknut and tighten the tensioner.
The 2001 Kia emergency brake can be adjusted with the emergency brake adjustment bolt. The adjustment bolt will be on the emergency brake pad.
If the cable aren't frozen. Adjust the rear brakes first. Then if possible, haven't looked at mine in awhile adjust the cables probably under the car
A stock emergency brake, on a Chevrolet truck, can be released by manually disengaging the emergency brake. This can be accomplished by loosening the tension nut on the brake.