Want this question answered?
To set the idle, adjust the carburetor.
To bring the idle down on a Yamaha badger is really easy. All you have to do is adjust the fuel settings on the carburetor.
Find the carburetor and then adjust the idle screw however you like. You'll need a Philips screwdriver.
This is computer controlled
there is a little screw on the back of the carb. if you loosen it, it will idle slower, tighten it, it will idle faster.
Idle is computer controlled and can NOT be adjusted.
buy a can-am and it will fix the problem
You probably can't. fuel injected cars have the idle set by the ecm.
There is no adjustment, the idle is controlled electronically. If you have idle problems you may have a vacuum leak somewhere.
The idle is control by the idle air control motor from outputs from the Engine Control Module.
In most 1990s and later vehicles you cannot adjust the idle. It is controlled by the ECM or computer. An idle that is not correct indicates something like a vaccuume leak or a sensor issue.
Ford stopped manufacturing the Falcon in 1970.