The 1999 Chevrolet Malibu automatic transmission shift cable has adjustment nuts on each end of the cable. Turning the adjustment nuts will lengthen or shorten the shifting cable.
you don`t know?
It is on the side of the throttle plate right across from the accelerator cable.
check cable under seat to see if it is ok! the one going to seat lever. if nessesary replace cable.
The shift linkage on your Chevrolet Blazer automatic transmission will go from the shifting handle to the right hand side of the transmission. The shifting linkage is actually a shifting cable.
Shorten it to make it downshift sooner. Lengthen it to downshift later at a higher power setting.
IDK who would know that only nerds not popular people like me!
On the pump there are two line marks,one on the lever the other on the the body. These twomarks must line up at an idle position. The end of the cable housing will have a threaded end with two nuts used to adjust the cable.
my cable was capable of that much adjustment
Chevrolet Blazer parking brake can be adjusted with the adjustment screw on the parking brake pad. The parking brake can also be adjusted with the parking brake cable.
To adjust the throttle cable, first open the hood of the car and locate the cable. Then, adjust the screws on either side of the cable. Following that, tighten the cable so that it is taut and there is no slack, but it is not over tight.
How do you adjust an F-250 shifter cable? 2000 model
There is none it is electric.