Want this question answered?
0.30 inlet and exhaust. If EFI then it has hydraulic tappits that self adjust. Chris
Brakes are adjusted automatically
brakes adjust themselves automatically
You don't. They're preset and no adjustments.
They are self adjusting. You don't have to adjust them. Problem is the wear limit on the drum is only 1mm. When worn to the limit the adjusters don't work.
inlet 10 thou, ex 12 thou. Done hot.
a ford laser a ford laser
you don't adjust it. It is a Hydraulic clutch unit. you have to bleed it. There is a 7/16" bleeder valve on the transmission. clay Colorado
They are not supposed to be reset because they are factory set to comply with emission laws. yes but where is it located
The valves on a Ford 300 straight six are not adjustable. If they are noisy you have worn valve train parts.
The Ford Laser is, in fact, a restyled version of the Mazda 323. Ford owns 25% of Mazda. In the U.S. it is a Mazda 323. The Ford Laser in the U.S is called a Ford Escort.
adjust inlet valve when exhaust valve just opens (you will see the rocker arm moving) adjust exhaust valve when inlet valve just closes do 1 cylinder at time to reduce stuff up factor this method works on all adjustable tappets & over cam engines and especially hi lift camshafts and the adjustment is taking place at the rear of the cam lobe