Want this question answered?
you can't it is controlled by the computer.
WHATS THE TIMING MARKS ON 93 MAZDA 929
I would suspect you need a new timing chain or belt depending on which is installed. A worn belt or chain will jump time.
In a 1989 Nissan Pulsar NX : The 1.6 litre four cylinder engine has a timing CHAIN The 1.8 litre four cylinder engine has a timing BELT
.144
The brake fluid reservoir on a 1989 Mazda 626 is on the master cylinder. This is located in the engine compartment on the drivers side.
Yes, a Mazda B2000 is most definitely a 4-cylinder with a 2.0L engine. However, technically Mazda didn't produce the B2000 as a 1988 model. It was made in 1986-1987. Then in 1989 Mazda made the B2200 Pickup, which is a 2.2L 4 cylinder.
most likely a belt, mine has the belt
You cannot adjust the clutch. It is hydraulic, with a master cylinder and slave cylinder in the transmission. Their are no adjustments. Make sure system has fluid and no leaks.
I have worked on many engines, I would guess broken valve. Check every cylinder with a pressure gauge. If zero broken valve, if all have good pressure, timing. If timing good, fuel. maybe flooding.
All mazda b series with a b2000 or b2200 are a NON interference engine.So in short if your timing belt broke it will not damage the engine.
The timing is adjusted by the three bolts that holds the injection pump. The holes in the pump are slotted.