Want this question answered?
92 octane is recommended
1-3-4-2
yes sure 100 percent possible because the only difference with these two engine is the bore diameter.4g15 is about 75.5 bore while 4g13 is 71mm diameter.distributor are just the same.
Fuel Pressure Stock @ 1.3 12v Colt: Type: Elec Pressure: 3.3 / 3.5 bars Bruno Marques @Portugal
Tighten the bolt in the sequence until each is torqued to 49 Nm, then completely loosen all the bolt then re-tighten them in sequence once again until each torqued 20 Nm. tighten each bolt again by 90 degree in accordance with the tightening sequence. After that tighten each bolt again by 90 degree in accordance with the tightening sequence. Some mechanics will refer this method as "20+90deg+90deg"