Not as difficult as you may think. Take a floor jack, put a piece of long 2x4 on the jack, put a piece of cloth on the 2x4. Open the door slightly, take the slack off the hinges by bringing the jack upward.
Now, loosen the bolts that connect the door hinge to the body of the truck. Do your back and forth and up and down adjustment as necessary. This will take some trial and error until you get it right.
Now, loosen the bolts that connect the hinge to the door itself. Get a flat screwdriver and hammer the washer loose that is attached to the top bolt for the top hinge and bottom bolt for the lower hinge. Now adjust your door in and out on the top and bottom until satisfied with fitment.
Ta Da, you're done. Don't get frustrated. It helps to have a helping hand to manipulate the door whilst you tighten the bolts.
1500-1500, yes
Yes.
No.
x
6
It was an option.
No, there is no filter !
Not equipped.
6000 lb
I am looking for the diagram for the serpentine belt for a 2006 Dodge Ram quad cab.
I need help removing my dash to get to the back of my stereo on my 2006 dodge ram 1500
All fuses on a 2006 Ram 1500 are in the box under the hood next to the battery.