How do you align the oil pump gears on a 22 RE Toyota?
How do I align the arrows on the gears for a oil pump on a 1992 toyota 22 RE engine?
a gear pump is just that. it has a pair of gears in mesh with each other. a shaft drives one of the gears turning the other gear while oil is captured in the teeth outside the gears and carried from one side of the pump to the other. a trochoid is similar in operation but uses an inner and outer ring to do the same thing. usually they are precision ground and orbit about…
You need to follow the same procedure as for timing belt replacement. But in the case of the oil pump you have to remove the oil pan too. There is a strainer attached to the oil pump from the bottom you will have remove it too. Then replace the oil pump, make sure that you have replace the oil pan gasket, and oil pump gasket.
You should have two sets of three gears for the cams, the bottom one is the drive gear and they both have 2 marks on them. On the driver side drive gear the mark closest to the center will align with the timing mark on the retainer ( about 9 o clock ) and the passenger side is at 12 o clock. The other two marks should point to 11 and 1 and align with…
Do you have to remove the oil pump to put in the pump rod or can you just slide it in the distirbutor and put it in on a ford 302?
How do you align the crankshaft sprocket to the oil pump housing on a 1990 Nissan Pathfinder when replacing the timing belt?
the mark is a notch in the oil pump housing on the lower right side as you are looking down, and on the crankshaft pulley it is a white mark opposite side of the woodruff key on the face of the pulley. at the topside align the white marks on the belt with the punch marks on the pulleys and the rear timing belt cover.
if you have the buick 3.8 engine. this engine is known for low oil pressure at high mileage. the cause is the oil pump is external built into the timing cover. the problem is the pump gears (rotors are made of hardened steel mounted in a soft aluminum housing,which is part of the ting gear cover. they do make a oil pump rebuild kit which includes the pump internal parts, my experience 30 year pro…