Steps for Immobilization - Step 1
1. Remove Reel Splint from storage case.
2. Disconnect ischial strap. Remove ankle harness and traction ratchet from splint.
3. Loosen outside (distal) hinge knobs and return splint to neutral position.
4. Loosen top (proximal) hinge knobs so splint can be controlled. Place tension on hinges to allow for firm movement.
Step 25. Determine placement, i.e., anterior, posterior, lateral, or medial.
6. Adjust splint to match extremity position and place on limb.
7. Fine tune angle adjustment for proper fit and securely tighten both distal and proximal hinge knobs.
Step 38. Apply support strap, pulling tab securely. Stabilize splint to prevent movement to injured extremity.
9. Loosen proximal length adjuster, adjust for proper length. Re-tighten and repeat process for remaining adjuster.
10. Apply ischial strap.
Step 411. Loosen distal length adjusters, extend to desired length, re-tighten.
12. Apply and re-tighten remaining support straps.
Step 513. Wrap Harding Strap under foot and attach to distal crossmember.
14. Survey placement, recheck for tightness and extricate.
2
It rekindles (flames up) the glowing splint..
Oxygen will rekindle or relight a glowing splint.
The stick used to light a Bunsen burner is called a splint however you have to light the splint with a match
Place a glowing splint into the test tube. If the glowing splint relights, then oxygen is present, otherwise oxygen is not present.
2
Curacao
apply a brace or splint to the area
Size it to the good leg and secure it above and below the injured site
You light a splint and then light the bunson burnor with the fire on the splint.
Position rigid object, apply padding, secure padding, and secure rigid object.
68W school is 16 weeks at Fort Sam Houston, TX. The first 8 weeks are the EMT side the last 8 weeks is the combat side of the training.
A buddy splint, such as taping one broken finger to the other.
27S X 68W is in the Argentinian Andes at 16000 ft. It's where the world climbing record was set by a Jeep Wrangler. /l ,[_____], l---L-OlllllllO- ()_) ()_)-o-)_)
A wrist splint is used to stabilize or immobilize the wrist joint. The materials used for a wrist splint vary; some are quite hard such as a plastic splint, while others are quite soft such as an aluminum splint.
A burning wooden splint has a visible flame at its burning end while a glowing wooden splint has glowing ember at its glowing end. Placing a glowing splint in a container with oxygen will cause it to burst into flames and become a burning splint.
Your health is the code for a baseball splint.