0
If you would want to apply a stripe to your painting project the best time to do this would be after all other paint is dry. This should be the last step in your project.
Wiki User
∙ 10y ago
Wiki User
∙ 11y agoYou mask the shape of stripes that you want, then spray the unmasked parts. When the paint dries,pull the masking and you will see your stripes.
Add your answer:
Earn +20 pts
Can you apply an epoxy coating over an existing epoxy coating that has peeled?
If your old epoxy is good then you can apply over it, but there are many facts to consider before applying over existing epoxy coating.
What part of speech is the word stripe?
Stripe is a noun (a stripe) and a verb (to stripe).
What is a good waterproof coating to apply to an exterior oak door for western NY state?
Any good polyurethane varnish.
What is the difference between epoxy phenolic -epoxy based coating and acrylic coating?
.
Where can one find a ceramic coating supplier?
You can find a ceramic coating supplier at the Sancera Coat website. Alternatively, you can also find a ceramic coating supplier at websites such as Powder Buy The Pound.
Waterproofing outdoor patio furniture.?
The most important step that you can take would be apply weather proof coating. To apply the coating, you should start out by drying the surface, and then layer on the coating.
Can you apply an epoxy coating over an existing epoxy coating that has peeled?
If your old epoxy is good then you can apply over it, but there are many facts to consider before applying over existing epoxy coating.
What is a stripe coat when painting?
A coating system may consist of a coat of an anticorrosive material (primer) and one or more stripe coats. Stripe coats are applications of the top-coat (paint) which has been applied to edges of structure, welds, drain holes and other areas to over-come potential problems that can result when paint coverage is difficult/insufficient or non-uniform. In a perfect coating system, the coating develops a constant thickness that never exceeds the proper limits (either too thin or too thick). In reality, most coating materials exhibit behaviors that cause a reduced thickness around sharp corners like edges of structural steel profiles. This is caused by two phenomena: one is the surface tension of the coating material trying to "pull" from the edge, thinning the coat. Two is the chemical shrinking that many polymers exhibit when curing. Epoxies and polyurethanes show a marked shrinking. In adition to reduced coating thickness, the coating develops Residual Stresses that promote minute local failures in the coating, that progress until the coat fails or delaminates. To reduce this phenomena, two things can be done: A) provide radiusing to reduce the Stress level and prevent coating failure at sharp edges. B) Apply a "Stripe-Coat" to all edges, welds, joints and high stress areas. Radiusing is expensive and time consuming. Stripe coating is therefore the preferred solution. To provide a good Stripe-Coat, the painter must use a different color of material, painting a one to two inch stripe at every edge, weld, etc. For this action, there are special brushes, rollers and cartridges that supply the coating in the best way possible. Check Sherwin-Williams (and many others) specific materials for stripe-coat application. Check Theoretical principles at Academia.edu under "Fenómeno de generación de Esfuerzos Residuales". Amclaussen, Mexico City.
Stop metal rusting?
Provide a coating to the surface of the metal either a permenant or temporary. For a permenant coating, apply a paint or lacquer formula For a temporary coating, apply either oil, wax or pollish, which you will have to replenish often
How can you do manicure easily?
if u want to put acrylic nail polish 1. apply tape on the white part of your nail 2. apply the coating 3. after the coating dries take of the tape and apply transperent nail polish
Is there a pool coating to stop leaks you can apply over chlorinated rubber?
no
What can powder coating be used for?
Powder coating is a substance used for the coating of items such as household appliances, drum hardware, and vehicle parts. The difference between this type of coating and liquid paint is that the powder does not require any solvents to bind to the materials. Powder coating is the process you use to apply a coating without using solvents. This is the newest coating technique in the industry right now. You usually apply this type of coating to create a hard finish on metals and because it allows you the flexibility to apply to a different layer of thickness. You would see this finishing in materials such as aluminium, medium density fibreboards, fusion-bonded epoxy and acrylics, usually on automobile finishing.
Do i need Florida license to apply roof coating on commercial buildings?
Only in FL!
Resins that could make textile into bullet proof by coating or laminating technique?
how to apply it on the car
Difference between conventional coating and film coating?
The difference between the conventional coating and film coating depends with the material used. The film coating uses a film to coat while the conventional coating does not use any type of material to coat.
How do you keep the pumpkin from pulling away from the pie crust?
Apply any coating (glazed sugar syrup) .
What part of speech is the word stripe?
Stripe is a noun (a stripe) and a verb (to stripe).
