You take the battery and attach it to the candle.
On a car battery, the cables attach to two metal posts which stick up on the top of the battery.
You insert them.
Pressing it on with hot wax is the only way.
The purpose of a battery operated candle is for ones safety. It is used to help people keep safe as they are safe to use. You can buy these from online.
To hook up jumper cables, attach one cable from the negative post on one battery to the negative post on the other battery. (These usually are marked "-" and have a blacl cable attached to them.) Attach the other jumper cable from the positive post on one battery to the positive post on the other battery. (These usually are marked "+" and have a red cable attached to them.)
you have to have the battery held up by someone or somthing to attach the cables, then when you get them tight, lift the batt up until the bottom clears the tray and then slide it back
1. Remove negative battery cable 2. remove positive battery cable 3. remove battery 4. install new battery 5.attach positive cable 6.attach negative cable
The parts of the battery that stick out are called the terminals. That is where you attach the wires to the battery so you can use the electricity from the battery.
To make the monster take the candle you have to get the rope from the lighthouse and attach it to a candle then put it down and a crab will come and take the candle because the monster is a polar bear named Herbert with a crab named klutzy. That's how to get t crab to take the candle hope i helped! :)
Take a Energizer, Duracell, etc. battery (the bigger the bulb the bigger the battery) and a paper clip. Bend up the paper clip to a pretty straight line, and attach one end to the end of the lightbulb. Attach the other end to one end of the battery, and POOF! Light! If the bulb doesn't come on try attaching the paper clip to the other end of the battery. If it STILL doesn't work, get a bigger battery.
You can attach a motor to a battery by connecting the positive terminal of the battery to the positive terminal of the motor using a wire, and connecting the negative terminal of the battery to the negative terminal of the motor. This will allow the motor to receive power from the battery and start spinning when turned on.
Put the solar panel in the sun;Attach the red wire of the panel to the positive terminal of the battery;Attach the black wire of the panel to the negative terminal.