where would i locate the fuse for rear pasenger side door electric windows
To replace the electric windows on a Citroen Xsara Picasso SX, first, remove the door panel by unscrewing any visible screws and carefully prying it off. Disconnect the electrical connectors and remove the window regulator assembly by unscrewing it from the door frame. Install the new window regulator, reconnect the electrical connectors, and then reattach the door panel, ensuring everything is secure. Finally, test the new window operation before fully sealing the door panel.
There is a clip on the back side of the window crank that you have to take off, then take the door panel off.
Yes there is a fuse for the power windows.
no
Yes there's also one in your fuse panel by the driver's side door.
If you have electric windows, and you turn the key to open the door and hold it turned for about 3 seconds, the windows will automatically roll down. You can then enter through the windows
under the cassette tape box between front seats
The first American car with electric power windows were introduced around 1946 by Lincoln. These are driven by a small electric motor inside the door and have come to be universal in the industry. Prior to that date, in the few vehicles offering this feature, the windows were driven by hydraulics or off the engine vacuum.
Depending on your state, the legal amount changes from 5% to about 70%. There are also varying limits depending on which windows you use the tint, such as back windows, or front door windows, or even back door windows. Generally, try to stay around 25% at most to be safe.
Lock door with key .... unlock door with key then lock and hold key over for a few seconds
Try checking the fuses.
To change an electric wing mirror on a Citroen C3, first, disconnect the vehicle's battery for safety. Remove any plastic covers and unscrew the mirror assembly from the door by taking out the screws or clips holding it in place. Disconnect the wiring harness from the back of the mirror, then replace it with the new mirror by reconnecting the harness and securing it with screws. Finally, reattach any covers and reconnect the battery before testing the new mirror.