set motor in a vice hook up a good grond wire hook up a power wire to the pos side of where the wires attach then using a test lightyou can check rest of poles to see what is getting pthen using the power wire you can touch it to different poles to see what speeds are working note that bench testing a wiper motor ,tests with no load the wiper motor may appear to be good in this test,but not be good when installed with wiper blades attached and adding load to the motor From Willcox Corvette: The 68 Wiper motor is unlike any other Corvette Wiper motor and can be damaged if hooked up wrong. We have detailed instructions on how to bench test this motor on our web site. Here is the link: http://willcoxcorvette.com/repairandinstallhelp.php?hID=195
wiring diagramfor 1968 windshield wiper motor
ground issue on wiper motor housing
On the firewall to the left of the wiper motor
The 1968 corvette fuse panel is under the drivers lower left side of the dash .
no
4,663.00 for the coupe.
182.1 inches is the overall length.
A roadster is a convertible. The Stingray was the 1969-1977 Corvette model. The 1968 was the same body style, but was not called Stingray.
1968 to 1983 i believe
1968
Factory stock ignition timing for the Corvette 327 ci 350 HP is 4 degrees BTDC.
68 charger 68 mustang 68 corvette