Want this question answered?
help
not quite sure
It is on the pipe behind the engine that goes to cabin radiator
how does engine cooling system on berlingo 1.4 work
By loosening the bleed screw on the pump. The filter may also need to be primed, which should be done first.
Loosen the injector lines at the injectors not the pump then crank the engine till there is fuel at the injectors then retighten the lines.
how do you bleed a diesel peugeot cooling system
bleed fuel line ford diesel 250 pickup 2005 how does one bleed the fuel lines in that truck ?
you will have to open a injector on the engine to let the fuel bleed make sure all air is out the system
Air can be bland from the diesel fuel system on a Isuzu D-Max 3.0 engine by hooking an air compressor to the fuel line. Loosen the fuel line at the other end of the engine. The air will be removed.
take to a garage to bleed needs a mehanical tool to prime bleed the fuel, if u try to self bleed it by turning the engine over u will destroy the fuel pump, and big money to replace it
On a 307sw THERE IS A RUBBER BULB AT THE BACK OF THE ENGINE( REMOVE THE PLASTIC COVER ON TOP OF THE ENGINE FIRST BY LIFTING UPWARDS ) SQUEEZE THIS SEVERAL TIMES TO BRING THE FUEL THROUGH TO THE ENGINE.