0
you will need two people 1 person inside to pump pedal other to take pipe out when pedal is held down first pump pedal 10 times on the tenth time hold pedal down then on the clutch master cylinder on the bulk head there is a pipe with a retaining clip around it going into it un clip the clip and pull pipe out one notch not all of it and let fluid bleed out push pipe back in repeat until pedal is normal.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Bleed clutch on ford transit van?
A person can bleed the clutch on a Ford Transit Van by hooking a bleeder hose to the slave cylinder, placing it into a small jar of hydraulic fluid, and loosing the bleeder screw. The clutch is then slow pressed until no air bubbles are present.
How do you bleed the clutch line on a 2004 ford ranger edge?
how do I bleed the clutch system in a 2004 ford ranger
How do you bleed clutch system on 2001 f-250 7.3?
how to bleed the clutch system on ford f-250 2001 truck
Where is the clutch bleed valve on a 1988 ford f-150?
On the clutch slave cylinder
What is the oil type for Ford Transit?
engine oil ford transit 2000 on is sae 30
What is the torque settings for a ford transit 2000 flywheel?
torque stettings for a ford transit van 200
Do you need your engine on to bleed clutch on my mk3 Ford Mondeo?
no you dont
How do you bleed the power assisted clutch on a 1994 ford escort wagon?
Thru the bleed valve on the slave cylinder attached to the transmission.
How to adjust Clutch on 2000 ford f 250?
the clutch on a 2000 ford f250 is a hydraulic clutch there is no adjustment however check the bushing on the rod and pin on the clutch pedal this bushing wears out and you loose pedal if the pin is wrn ,you will have to replace the clutch pedal
What kind of clutch fluid do you put in a 2000 mustang 5 speed?
Your clutch is operated by a cable , it's not a hydraulic operated clutch on the 2000 Ford Mustang
Does a 2000 Ford Ranger have a self adjusting clutch?
yes
How do you bleed the clutch on a 92 Ford f 150 4 speed with overdrive?
at the slave cylinder, you will need to remove the clutch inspection plate to do so.
