To bleed the brakes on a 2002 impala, have a helper pump the brake pedal then hold it down. Open the bleeder valve at one wheel, and let air and fluid flow until the pedal goes to the floor. Close the valve and repeat. When there is no air in the fluid, then move to the next wheel and repeat.
The same way you bleed brakes on a newer car, bleeder valves are in back of the wheel cylinders on the backing plate.
Watch how you take them off and put them back on the same way. Then you have to bleed them since there drum brakes
There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
You bleed the brakes just like you bleed any other cars brakes, there is no special way to bleed anti-lock brakes.
You need 10mm wrench
There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
how do i bleed brakes on a 2003 hyunia xg350
If you have to ask how to bleed brakes, do not do it yourself.
Having ABS does not change how you bleed the brakes. Bleed them as you would if it did not have ABS.
Air in the brake system. Bleed the brakes again.
you change the brakes,check brakes fluid,bleed the brakes why is hard to stop in a 1988 sliverado?
How do you bleed master