No, it will bleed itself when it runs.
In order to bleed a fuel system on a diesel x-trail you will need to release the fuel in the system. This can be done by removing the fuel system or draining the pump.
you should unhook supply line and return fuel line from back of head this will bleed fuel from head. to bleed entire fuel system unhook fuel lines at fuel tank be sure to plug fuel tank or you'll loose all your fuel in tanks.
If This Is To Remove Air From Fuel Lines. Forget It. You Do Not Have To Bleed The Fuel Line.
ftygin
I'm not sure why you would want to do this. The fuel pressure reguator will automaticly bleed air from the system.
you dont have to it does it itself
No need to bleed lines, since the system is under pressure.
34ftlb is the torque for 1993 Yamaha xj600s. I am giving the linkthat will increase the knowledge about bikes.
take to a garage to bleed needs a mehanical tool to prime bleed the fuel, if u try to self bleed it by turning the engine over u will destroy the fuel pump, and big money to replace it
There is a schrader valve on the fuel rail that will allow you to blled the system. This is not normally necessary as the air will be pushed out by the fuel pressure.
Shoot it. I find shooting people makes them bleed... same basic idea.