It depends what system you're talking about but assuming it's the brake system.
Top up brake fluid reservoir. Have an assistant pump the brakes several times ( 5-10 ), then hold pedal in until you say when. While assistant is holding, go to furthest brake from reservoir and open bleed screw until fluid and hopefully air escapes. At this time assistant will note that pedal goes to the floor. Close bleed screw. The assistant can now release the pedal. Repeat the procedure until no more air comes out at that brake. Then move to each brake from furthest from reservoir to closest and repeat the same procedure until all are done. Check fluid in reservoir repeatedly during the process and when done.
how to bleed air out of cooling system 1997honda civic ex
If the cooling system is in good working order the system will bleed the air out itself. If the system has a leak anywhere no matter how small the system will never bleed the air out.
procedure on how to bleed air out of coolant system on 97 saturn ls
there should be a air valve on the engine that you can bleed the bubbles out of the cooling system.
how do you bleed air out of a 300 tdi discovery landrover
Removing any air in the system.
Then you need to bleed the brake system to remove the air.
how do i bleed my accord v6 2000 coolant system, its has air and the rev's gone up & down......
The bleed screw is by the thermostat housing it looks like a brake bleed screw
Air in the brake system. You need to bleed the air out of the system.
its a valve to let the air out of the system
Engine cooling system is not a closed system you can't remove the air.