Start at the longest (R-R) line and work towards the shortest (L-F)
Make sure master cylinder does not get empty throughout this procedure Attach a flexible hose to the bleeder screw at the top of the wheel cylinder
Put other end into a container filled with clean brake fluid
Have assistant pump brake pedal 3 times and hold approx. 2/3 from from floor
Open bleeder screw
Pedal will drop
Observe container filled with fluid for bubbles
Close bleeder screw
Repeat until No bubbles are observed
Repeat at next wheel
it should be about 9.5 mpg
No, the last year that GM used points in their distributor was in 1972.
get a chiltons repair manual for chevelles and read up.
if it is a v8 it's 1-8-4-3-6-5-7-2
No. The 72 Chevy more than likely came with a np203. You will need one of the following to mate with a 700r4 or 4l60e: np208, np231, or np241.
yes they did. both 71 and 72 came standard with disc brakes and they were all 5 lug. 1967-1970 were all drum brake and 6 lug
No.
The normal operating temperature for a 350 crate motor in a 1972 Chevy Blazer is averaged at a temperature of around 180 degrees and 190 degrees, apparently depending on the kind of thermostat one uses.
1972 Super Beetles had 4 drum Brakes. I know, since I own one. Richard
I believe 1967 for Chevy cars and 1972 for Chevy trucks.
Wagonners, pickups, and the Jeepster had disc brakes in 1972. The CJ did not get disc brakes until 1977.
how to replace rear brakes on 1972 f600