Hello,
Bleeding the brakes on a '02 Quest is quite easy. Here is a quick walk-through on the job:
1. Turn ignition switch OFF and disconnect ABS actuator and control unit connector or negative battery terminal.
2. Connect a transparent vinyl tube and container to air bleeder valve.
3. Fully depress brake pedal several times.
4. With brake pedal depressed, open air bleeder valve to release air.
5. Close air bleeder valve.
6. Release brake pedal slowly.
7. Tighten air bleeder valve to: 71 inch lbs. (8 Nm).
8. Repeat steps 2 through 7 until no more air bubbles come out of air bleeder valve.
9. Bleed the brake hydraulic system air bleeder valves in the following order:
§ Right rear brake
§ Left front brake
§ Left rear brake
§ Right front brake
The 2002 Nissan Quest has 12 valves.
The 2002 Nissan Quest has a V6 engine.
The 2002 Nissan Quest is a gas-powered vehicle.
The 2002 Nissan Quest has a 4-speed automatic.
The 2002 Nissan Quest has single overhead cam (SOHC).
The 2002 Nissan Quest runs on regular unleaded.
The 2002 Nissan Quest is 16 ft. 2.6 in. (194.6 in.) long.
The height of the 2002 Nissan Quest is 5 ft. 7.3 in. (67.3 in.).
The curb weight of the 2002 Nissan Quest is 3984 lbs..
The 2002 Nissan Quest has 62.3 in. of front shoulder room.
The 2002 Nissan Quest has 36.4 in. of rear leg room.
The 2002 Nissan Quest has 39.9 in. of rear head room.