The brakes on a 97 S-10 are bled by attaching a vacuum pump to the bleeder valves and loosening the valve. The vacuum is then used to draw out air until only fluid is present.
the most probable cause is, there is air in system, bleed brakes
Only when the system has been opened.
bleed it the same way u would bleed the brakes the bleeder is on the driver side of the trans on the bell housing
right rear ,left rear, right front ,left front.
You replace the brakes on an ABS S10 the same way you replace brakes on a non ABS S10.
You bleed the brakes just like you bleed any other cars brakes, there is no special way to bleed anti-lock brakes.
Replace the radiator cap and be sure the coolant reservoir is kept full to the line, it will bleed itself.
how do i bleed brakes on a 2003 hyunia xg350
If you have to ask how to bleed brakes, do not do it yourself.
Having ABS does not change how you bleed the brakes. Bleed them as you would if it did not have ABS.
you change the brakes,check brakes fluid,bleed the brakes why is hard to stop in a 1988 sliverado?
How do you bleed master