pump the clutch pedal until it feels stiff. this may take a while. when it becomes stiff hold it to the floor. have a helper turn the bleeder screw on the slave cylinder. air bubbles and some fluid will come out of the bleeder screw. thighten the bleeder screw and repeat the sequence until there is no air coming from the bleeder.
How do you replace starter on2.3 cy 1991 pontiac grand am
In a 1991 Pontiac Grand Am : According to my Chilton's Auto Repair Manual : ( 13.6 U.S. gallons )
=== === === ===
The clutch bleeding is similar to bleeding brakes. Although you must be sure the clutch cylinder is higher that the bleed fittings and if you can't get it to bleed you may have to purchase a tool at you local parts store that will force bleed the system. This will pull the air out of the system and pull the fluid in. Always be sure to keep the master clutch reservoir full at all times.
if the clutch is hydraulic operated, bleed the cluth if it is mechanical cluth, adjust the linkages
The fuel pump on a 1991 Pontiac Grand AM is located within the engine bay. Fuel pumps can come in both mechanical and electrical formats and is connected to the fuel lines on the vehicle.
Side post battery
You must remove the fuel tank.
You must bleed the clutch dampener before bleeding the slave cylinder its that weird curvey steel hose before the slave unter the passangers feet. look arount the side of the dampner for the bleed screw
The 1991 Pontiac Grand Am gets 19 miles per gallon in the city, and 30 miles per gallon on the highway. It can hold up to 13.6 gallons of gas.
fill the clutch resivoir pump the clutch pedal open the bleeder screw and tighten it back up and repeat until the air is out and just fluid comes out
all the spark plug wires are on it