Want this question answered?
On top of the differential.
Switch? both headlights?
You can sign in in the Mazda website as a owner, then once you are register you can add a 2000 b2500 and download the owner manual there is a picture of the fuse box
no where eBay is best bet only about £3 UK
there is a bleeder valve on the right side of the tranny that is where you can bleed your system
http://www.fiatforum.com/punto-technical/112771-help-bleeding-clutch-2000-punto.html
the best way to "bleed" any clutch is to get a can with a pump and a hose that will fit over the bleed screw. Loosen the bleed screw put the hose over it and pump fluid back up to the master cylinder this will force any air out.
Yes. Hydraulic pull type
DOT 3 brake fluid.
theres no adjustment. need to replace the clutch.or if clutch is new you need to bleed the slave cilinder by the transmission
unfortunately Saturn went out on a limb to produce easy swappable parts in their cars. the clutch hydraulic system can not be bleed. it was intended on being replaced as an entire unit, filled with fluid and bleed at the factory. I've made many trips the salvage yards to obtain a entire assembly.
I replaced one on my 2000 Mazda b2500. it's located on top of the differential. You un hook the one wire harness, remove one bolt and pry it out with a screw driver. It's not in there too tight, comes out pretty easy. It fixed my speedometer, ABS light and check engine light. I had to use a mirror fixed above the differential and a flash light to see what I was working on. Or you can just feel for it. You can get the part from autowarehouse.com for about $18, great place for parts. Now mine is a 2000 yr. I don't know if the 1999 would be the same or not. Good luck. By the way, dose anyone know the difficulty factor on changing the spark plugs on this 2000 Mazda b2500 4 cylinder engine? It doesn't look like fun to me.