bleed clutch Saturn vue 2003
All the newer cars have self adjusting clutches that are hydraulic, they work on the same principle as disc brakes, as they wear the pads keep getting closer to the rotor or as in your case the clutch disk.
there dry clutch's, run a cable. no fluid. .:. you can't bleed it. :)
please tell me how to replace clutch on my 2004 Kia optimia
please tell me how to replace clutch on my 2004 kia optimia
how do I bleed the clutch system in a 2004 ford ranger
after the clutch master cylinder has been replaced.
The clutch can't be adjusted. It is an hydraulic clutch. The clutch pedal sends pressure from the master cylinder to the slave cylinder on the clutch. IF you are having trouble with it the thing to do is bleed the air out at the slave cylinder. Have an assistant pump the clutch and hold it to the floor. Then open the bleed valve on the slave cylinder to let the air out of the system. On the final bleed hold the clutch to the floor and close the bleed valve on the slave cylinder. The clutch master cylinder operates of the brake fluid reservoir. Make sure you keep this full of brake fluid as you bleed the clutch.
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.
same way you bleed the brakes. push clutch all the way to the floor and release the bleed valve on the transmission. tighten it up, release the clutch. Need 2 people to do it.
shhould be da same way u bleed your break system... bleed valve on clutch master cylinder...
try to bleed the clutch