When the intra and extra-cellular fluids become very acidic, proteins will not be broken down, because an acidosis bring the pH down, usually, no more than 1 pH. Therefore, that does not effect proteins much.
Distilled water, if it is truly distilled to purity, has a pH of 7. This means that the concentration of hydrogen ions dissociated from the water is 1x10-7 mol dm-3. Often, distilled water is impure, and is slightly more acidic (it has a slightly lower pH than seven).
The preferred soil pH level for strawberries is 5.8 to 6.2. If the soil is too acidic, add ground limestone to bring the pH level within that range.
The pH of the orange juice will go down, making it more acidic.
The answer is The reason it would smoke is that there is a reaction going on, which means that your water is Basic. maybe there is a lot of lime in your water. Nothing to worry about just put in enough acid and chlorine until the pool is at the right pH and chlorine level
a pH of 1 is very corrosive.7 pH and above is alkilinity. 7 and below is acidity
1. M-Alkalinity (also known as Total Alkalinity) measures the amount of carbonate, bicarbonate and hydroxide present in terms of "ppm as calcium carbonate". ( M-Alkalinity measurement is based on a sulphuric acid titration using a Methyl orange indicator that goes from yellow at a pH of 4.5 to orange at pH of 4.4 at the endpoint.) 2. P-Alkalinity measures the amount of carbonate and hydroxyl alkalinity present in terms of "ppm as calcium carbonate". P-alkalinity is measured down to a pH of 8.3. The M-alkalinity is measured down to a pH of 4.3.
You have to know what you are doing. The addition of muriatic acid lowers the pH and total alkalinity in swimming pools.
It's a common misspelling of "alkalinity", which is the resistance of water (often treated water or pool water) to change in pH levels. It's not inaccurate to think of "alkalinity" as 'pH stabilizer'.
add a solution to it that has a low pH level (an acid) to neutralise it, or bring it down slightly. What is it that has the high pH?
use muratic acid to bring down Ph and TA
I have treated for metals and algae and now have a problem getting the chlorine levels up. The ph, hardner and alkilinity is ok.
When the intra and extra-cellular fluids become very acidic, proteins will not be broken down, because an acidosis bring the pH down, usually, no more than 1 pH. Therefore, that does not effect proteins much.
pH of 1 to < 7 indicates an acid pH of >7 to 14 indicates a base pH of 7 indicates water
The pH level of waste water from the cement industry varies greatly. Most large cement producers have waste treatment facilities that bring the pH levels down to normal rain water levels.
you need to purchase baking soda, they sell it at wal mart in 12lbs bags in the pool care section, this will keep your water clear and lower the PH
what is ph level of waste water from cement industry