You don't. You buy the 6X8 speakers that actually fit properly.
the rear speakers are located in the back doors. you have to remove the door panels to get at them.
first, take the door panels off. next, there are four screws you have to remove. after that the speakers can be removed from the door, do not forget to disconnect the wiring harness from the speaker.
On a 1996 Mercury Mystique : There are ( 2 ) kick panels They are the interior trim panels , in front of the front doors , beside the drivers and front passengers feet
You will need to remove the inner panels to gain access.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.
Take the door panels off for the front. The back you can pull the grill off covering the speakers for direct access or remove the panel. Fairly easy to do, you will need torx drivers tho. I have the same question
need help on taking my speakers out.
Remove the door panels and unscrew the grills, then unscrew the speakers
Which speakers? Kick panels, door or behind seats?
Both dash and rear panels use 4x6 in speakers
The front door panels have 6 1/2" speakers and the rear speakers are 6x9"