it is kinda of complex, you need several things.
look here:
http://science.howstuffworks.com/led-incapacitator.htm/printable
and here:(the better option, but both are interesting) http://www.newton.dep.anl.gov/askasci/phy00/phy00142.htm
A strobe signal is the name for any signal that flashes on and off. For example the turn-lights on a car. Certain lights such as some leds aren't actually on all the time but flash faster than the eye can see, that is also a strobe signal.
Pin 8 is called Strobe pin. It is used for Phase compensation and Gain control to optimize frequency response. For this a capacitor(usually 47 pF) is connected between pin 8 and pin1
It is a data selector. There are 16 digital input lines, 4-bit decoder, strobe and output pin. So you put a 4-bit binary number from 0-15 into ABCD bits and the corresponding input value is found on output at the strobe time.
An emergency light is connected by attaching one set of wires to the buildings wiring and another to a built in battery. When the light detects the power has been cut, it will automatically switch over to its battery and turn on.
Its a security system similar to flash fog, that uses fog to stop a burglar, the intent is that he cannot find what he is looking for (literally). flashfog takes it up one more step, as it also includes a strobe light, that further cuts visibility by a factor of 3. more info at www.flashfogsecurity.com
A strobe light is typically a halogen bright white light with a timer on it that turns on and off the pulse of the light to create a strobe effect on it.
Answer=1.A Strobe is a light that flashes on and off continuously.
Nebraska
A strobe light
You may be able to find a strobe light at a party store, like party city. A really good place to find a strobe light would be at Spencer Gifts. They usually carry things like that in their stores.
it can be very bright lol
Whelen Strobe is a brand of lights, specializing in strobe light technology. The company, Whelen Engineering Company Inc., was established in 1952 in New Hampshire.
180 per light your welcome
There must be at least one strobe light location marked at each end of the MOS.
the only way to test one is to put the bulb in the strobe housing and apply recommended power.
You must always be careful when using strobe lights, but they can be lots of fun. You can find great lighting equipment at www.eliminatorlightingdirect.com
Flash, strobe, spotlights and photofloods are all sources of Artificial Light.