To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
Rating for DG set and any of electrical machines is calculated in KVA. KVA is calculated as KW/pf. One can calculate the required KVA for DG set with this formulation: (KW/pf)/load rate. For example KW=110, pf=0.8 and one loads the DG at 75%, so KVA= (110/0.8)/0.75=185 KVA.
1- low lube oil safety 2-water safety 3-temprechar safety any athar safety
formals to calculate exciation voltage of alternator
we know that ratio of holding current to latching current in scr is 0.4.
There are a great many equations for calculating current; it depends on the context in which you need to calculate current.
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
Rating for DG set and any of electrical machines is calculated in KVA. KVA is calculated as KW/pf. One can calculate the required KVA for DG set with this formulation: (KW/pf)/load rate. For example KW=110, pf=0.8 and one loads the DG at 75%, so KVA= (110/0.8)/0.75=185 KVA.
if power consumption is 130 KW. how can it convert into unit per hour.
What is the minimum height required for chimney of 100 KVA DG Set which is kept in
we want following to select Tower Application lika Airconditioning, DG set ETC Capacity of Application like for Airconditioning TR, For Dg Set KVA Heat to be released Water Flow Temperatur In System Temperature our System Rise of Temperature in Syste
the romans
1- low lube oil safety 2-water safety 3-temprechar safety any athar safety
1250 hrs
DG set is designed for 0.8 lag power factor. if it fall below this, we can used proper rating capacitor to improve this. what happens if we run the DG at .6 pf
DG
fgdf fgd gdfg dg dg dfg dfg dg dg dfg dd
In residential areaWhat are the existing rules on disposal of exhaust from high capacity DG sets say of the order of 625 KVA, four DGsets running simulta, weously.