A 7.5 kW three phase load will be balanced by the manufacturer. When connected to a three phase source the line current on each phase will be equal.
You need to specify the rating , voltage and phases of the motor to answer this question.
If you have three adjacent houses each with a single-phase supply taken from different phases in a three-phase cable in the street, the total power is equal to the sum of the powers in each of the three phases.
stress is the ratio between the load and area
Before you can calculate the load bearing capacity of a scaffold, you will need to know there are three types of scaffolding; light duty, medium duty, and heavy duty. Now you can calculate the load bearing capacity by using the height to base ratio.
Its is the condition when two different phases directly comes in contact with out any load or resistance.
Full load starting current is typically in the region of 5or 6 times the full load motor current;.
You need to specify the rating , voltage and phases of the motor to answer this question.
If you have three adjacent houses each with a single-phase supply taken from different phases in a three-phase cable in the street, the total power is equal to the sum of the powers in each of the three phases.
There are several ways to calculate working load limit. One of these includes Minimum Breaking Load (MBL) divided by Working Load Limit (WLL) equals Working Load Limit (WLL).
no load voltage - full load voltage by full load voltage
lolz
Sum the current and multiply by the line to ground voltage. Never use the phase to phase voltage unless you're dealiing with a dedicated load using all three phases like a 3 phase motor.
You mean heat load? Use Manual J.
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
To calculate the safe working load of a ship's bollard, you need the working stress and the force applied. These two will help you compute the safe working load.
all three of the phases
a and c phase