Sand is usually sold by the ton so if you find the amount needed by 100 x 1/6 this will give you your cubic foot total. Then you will divide by 27 which is the number of cubic feet in a cubic yard. You should have 16 cubic feet at these measurements. 16 divided by 27 is .59 or a little over half a cubic yard. There are 22 cubic feet of sand per ton so 1 ton of sand should do it. So if the sand in your area is sold by the ton then get 1 ton. If it sold by the yard get 3/4 yard if you can. Hope this helps.
2.15
In feet: Width x Length = Square Feet In inches: (width x length) /144= Square Feet
A cubic yard of stone that is 4" thick would cover 9 square yards or 81 square feet. If you need to cover 7000 sq. ft., you would need roughly 86.5 cubic yards. That's a lot of rock.
14.81 yds
625 times 0.5 = 312.5 cubic feet will be needed
Calculate attic square footage, calculate how much free area you need by dividing the attic square footage by 300. Convert the square feet needed to inches. Split the amount of free area needed equally between the intake and the exhaust. Divide that by 60, for how many vents you'll need.
To convert square inches to square yards, divide square inches by 1,296.
Square inches x 0.00694 = square feet
Multiply by 144.
The amount of space inside a square is called the area of a square. To calculate the area of a square, take the length of one side squared.For example, if a square has one side of 4 inches:area = 4 x 4area = 16 square inches
The amount of space inside a square is called the area of a square. To calculate the area of a square, take the length of one side squared.For example, if a square has one side of 4 inches:area = 4 x 4area = 16 square inches
You convert everything to compatible units. Then you multiply area x depth. I suggest you convert the depth to feet; in that case, the answer will be in cubic feet.
The amount of space inside a square is called the area of a square. To calculate the area of a square, take the length of one side squared.For example, if a square has one side of 4 inches:area = 4 x 4area = 16 square inches
The amount of space inside a square is called the area of a square. To calculate the area of a square, take the length of one side squared.For example, if a square has one side of 4 inches:area = 4 x 4area = 16 square inches
Inches is a linear measurement and square feet is an area.It is an apples and oranges things.BUT, if you want square inches to square feet, use this:1 square inches = 0.00694444444 square feet
384 square inches
You can calculate the amount of paint needed by finding the square footage of the room to be painted. Each manufacturer has a recommendation as to how many square feet a gallon of paint will cover. Make sure to calculate for primer if needed and or a second coat of finish.