0
What else can I help you with?
What is air blast burner?
An air blast burner is a burner where a controlled blast of air is supplied the gas. The burner has an air blast type fuel injector.
Why won't the gas burner not light on the boiler even though the pilot light is on?
my boiler wont ignite
What is turndown ratio of burner in gas fired furnaces?
Turn down ratio is the maximum to minimum heat output.Turn down ratio for direct gas fired burners is 25:1, which means that the burner can modulate from 4% to 100% of full fire. Indirect gas turn down ratio is typically 2:1, which limits the heat output from 50% to 100% of full fire. Mukesh Yadav
How does an oil burner work?
Oil burner magic!!
Would a pilot light on a gas furnace still work with a defective thermocouple?
Pilot light would work but the main burner would not as the thermocouple proves that there is a pilot light to fire. The main gas valve would not open
Why is the gas burner not lighting?
The gas burner may not be lighting due to a lack of gas flow, a clogged burner or ignition system, or a problem with the gas supply.
What is a gas burner used for?
Gas burner is used to heat materials in laboratories.
What is the use of gas jet in the Bunsen burner?
The gas is the fuel of the Bunsen burner.
What is the use of a gas jet in a Bunsen burner?
The gas is the fuel of the Bunsen burner.
Where does gas enter the Bunsen burner?
Gas enters the bottom of the Bunsen burner, where it travels up to mix with air before moving up the stem to meet the flame.
What is gas cock in the Bunsen burner?
A gas cock in a Bunsen burner is a control valve that allows the user to adjust the flow of gas to the burner. By turning the gas cock, the user can increase or decrease the flow of gas, which in turn alters the flame intensity and temperature of the burner.
What is the function of a gas intake tube of a Bunsen burner?
The purpose is the introduce the fuel gas in the burner.
What does the the nozzle do on a Bunsen burner?
The nozzle that the burner tubing connects to allows gas to enter into the burner. Also, the nozzle has a lever that allows you to control how much gas will flow into the burner.
What is a laboratory burner and what does it do?
probably a Bunsen burner the thing that you attatch to gas taps with a tube, add a match on top of the gas and you have your " lab burner" =]
What does the gas hose do on a Bunsen burner?
The gas hose supplies fuel gas to the Bunsen burner from a gas source. This allows the burner to produce a flame for heating or sterilizing purposes. The gas flow can be controlled using a valve on the gas hose.
What is the ruber tubing used for n the Bunsen burner?
The rubber tubing in a Bunsen burner is used to connect the burner to a gas source, such as a gas valve or gas outlet. It allows the flow of gas from the source into the burner, where it can be ignited to produce a flame for heating purposes.
What are burner used for?
A Bunsen burner is a gas burner. It is used to warm or heat the substances. Methane is used in this burner.
