22.4L
We can find the volume of gas by using this formula PV=nRT where:
P:the gas absolute pressure (in kPa or ATM)
n:number of mols (Moles)
T:the gas absolute temperature (Kelvin)
V/n:the gas molar volume (Liters)
R:universal gas law constant
You select the constant for R depending on the pressure unit you are using.
If P is in ATM, then R will be 0.082 (L*atm/mol*k)
If P is in kPa, then R will be 8.314 (L*kPa/mol*k)
You may have to do some conversions to get everything matching up pretty here, but they're extremely simple. For instance, temperature has to be in Kelvin (most science will be in Centigrade, so conversion for that is as simple as 273.15 + your temp in Centigrade).
As for pressure, there are quite a few different measurements, but the most common ones are kPa, ATM, and mm Hg.
Remember that 760 mm Hg = 1 ATM.
Most of the time, volume of a gas can be found by using ideal gas law: PV=nRT.
P=pressure
V=volume(litters)
n=number of moles
R= constant (0.0821L atm K−1 mol−1)
T=temperature(in kelvin)
use the relation 1 mol of gas = 22.4 Liters
this hold true for any gas at STP
(so if you have 2 mols of a gas, you have 2x22.4=44.8 Liters of the gas)
Wet volume includes the vapor pressure of water, while dry volume does not.
Natural gas can be considered either a wet gas or dry gas. A wet gas has associated liquids which can be condensed out of the gas at surface conditions. See related link.
It is called wet hydrogen gas because it is collected over water.
Wet hydrogen is collected over a water surface.
Wet rag.
It is the mass of wet soil divided by its volume.
A wet gas is a gas that has a small amount of liquid present. This can range from a humid gas, saturated with liquid vapor, or a multiphase flow with 90% volume of gas. There is not a defined quantitative definition of a wet gas flow.
Wet volume includes the vapor pressure of water, while dry volume does not.
In order to calculate the volume of a rectangular wet wall, one would first measure the wall's length, width, and depth. Then, one would plug the measurements into this formula: length x width x height.
The density of the dry material would have to be known to calculate this. In theory there could be no difference in volume. Most foods get smaller as they loose water though. Which means the volume of the dry food will likely be much less than the wet/fresh food. A rough estimate is 1/3 to 1/4 a volume of the dry equals 1 volume of the wet/fresh.
hgjgj
Natural gas can be considered either a wet gas or dry gas. A wet gas has associated liquids which can be condensed out of the gas at surface conditions. See related link.
The differences between a solid, liquid and gas are simple! A solid is an object that has a set volume, and is hard to compress. A liquid will take the shape of its container, but is hard to compress. A gas will take the shape of its container, and is easy to compress.
It is called wet hydrogen gas because it is collected over water.
A conventional baby scale can be used to calculate urine output. Weight the diaper before putting it on your baby, and then again when it is wet.
dry , wet that's all sometimes still can be the answer
Wet hydrogen is collected over a water surface.