Measure from a point to the corresponding point in the next wave cycle.
Not enough information to answer.
To calculate the wave number in a given wave equation, you can use the formula: wave number 2 / wavelength. The wave number represents the spatial frequency of the wave, and is measured in units of reciprocal length, such as radians per meter.
To find the frequency of a wave, you can use the formula: frequency = speed of the wave / wavelength. The speed of a wave in a specific medium is usually provided, so you can divide that by the wavelength of the wave to calculate the frequency.
The length of a Hz sine wave can be calculated using the formula: length = 1/frequency. For example, for a sine wave of 1 Hz, the length would be 1 second. This formula is derived from the relationship between frequency (number of cycles per second) and the period (duration of one cycle), where period = 1/frequency.
The speed of a wave is determined by the equation: speed = wavelength / period. Without knowing the wavelength, it is not possible to calculate the speed based solely on the wave period.
When you shorten the wave length, you increase the amplitude.
The length of a full cycle of a wave is called a "wavelength".
Ultraviolet has the longer wave length Infrared has the lower wave length
You can calculate a wave's frequency by dividing the speed of the wave by its wavelength. The formula is: frequency = speed of wave / wavelength.
If the speed and length of a wave decrease, the frequency of the wave will also decrease. This means the wave will have a lower pitch or tone.
I don't know what's "water length" but I do know that the deeper the water are, the faster the wave goes. If you meant wave length and not water length, then the longer the wavelength, the smaller the frequency of the wave.
No....