Torque = Force x Distance
eg i sit on a bench 2 metres from the left supporting force. I way 60kg. I am then creating a clockwise torque of 60 x 9.8 x 2 (9.8 because that is equal to gravity)
so 60 x 9.8 is my weight force (force) which is 588 Newtons. To calculate torque I then multiply that by the distance of 2 metres. So i would be creating a torque of 1176Nm.
P.S a common misconception is that a scale like the one in your bathroom measures weight. That's wrong, the scale measures mass. Weight is a force and must be measured in Newtons. That is why i multiplied by gravity (9.8). mass x gravity = weight.
T=Fh
where T is the Torque, F is the amount of force and h is the perpendicular distance from the pivot to the line of force.
Output torque = Input torque * (teeth on output / teeth on input).
Also >
Input torque * revs = Output torque * revs.
The wheel torque is the linear force multiplied by the radius of the wheel. If the linear force is in Newtons and the radius is in metres, the torque is then measured in Newton-metres.
same as drive gear
They are of similar design, but a fluid coupling simply transmits torque (with some frictional loss), while a torque converter amplifies torque, similar to a reduction gear.
The power output of a motor can be changed by the use of gears. Gears can be used to increase torque by reducing the speed of the output shaft by placing a large gear on the output shaft, coupled to a smaller gear. Conversely, by using a small gear on the output shaft, coupled to a larger gear, the speed can be increased with a reduction in torque.
I'm guessing you're talking about a disc viscometer, in which case the higher the viscosity, the higher the measured torque.
There are 3 possibilities:-1) If the pinion has less teeth than the wheel - torque is increased.2) If the pinion has more teeth than the wheel - torque is decreased.3) If the pinion has the same number of teeth as the wheel - torque is constant.
The driver gear has the input torque, and the driven gear has the output torque.
The driver gear has the input torque, and the driven gear has the output torque.
from power= torque*angular speed u can calculate torque and from torque u can find the force if the radius is known.
same as drive gear
how to calculate hydraulic motor torque
My car has lots of torque in first gear.
My car has lots of torque in first gear.
if like parallel forces and unlike parallel forces acts on body at same time what is their resultant force and resultant torque
Torque is increased on the larger, driven gear. The increase can be calculated as the ratio of the radii of the two gears. For example, if the small gear has a radius of 2 cm and the larger gear has a radius of 10 cm, the torque ratio is 10/2 (ten to two), or 5/1 (five to one). So the driven gear is producing 5 times the torque of the driving gear. The speed ratio is the reverse; the driven gear is rotating at 1/5 the speed of the driving gear.
Measure the rpm & calculate the torque as power divided by angular velocity
To increase torque.
It is best to remove the torque converter to change a gear box on a Nissan. This will help there to be a smoother time adjusting the gear box.