Make SURE that the breaker bar (3/8th NOT 1/2 inch) is long enough or you will pinch the handle or your hand when you release the tension. If you are careful, and keep control of the belt you can remove it completely over the fan blades without removing the upper radiator cover. the entire process should take 10-15 minutes. When installing the new belt, route it as the diagram on your truck indicates, but have the Alternator be the LAST pulley you slip the belt over. if not, you will have a hard time getting the belt on the tensioner and hold the tensioner all the way open. I do not have a 1995, but almost all serpentine belts have an idler pulley to keep tension. You take a breaker bar and turn the idler pulley nut releasing tension and then you can slide the belt off.
Change the air filter and spark plugs, and try to drive at a constant speed.
Need to know if it is the 4.3 or the 2.2 engine and if it is 2 wheel drive or 4 wheel drive.
Why is the water not circulating in my 1995 C1500 Chevy truck?
I have a 1995 chevy 4x4 with 4l60e which is bad i have other 4l60e out of a 1997 chevy 4x4 will it work ?
Type your answer here... uninstall 1995 Chevy g m c truck key cylinder
Yes there the same.
How do you engage four wheel drive on 1995 Chevy S-10?How do you engage four wheel drive on 1995 Chevy S-10?
Yes
yes, but would have to rewire if 1995 had different size motor
It is if you get the full version of it.
5"
Truck or car truck 210 hp