You should remove the disc or rotor that holds the lugs, they are pressed in form the back side. Fit the unit on an open vice or something similar and pound the broken lug out backwards.
buy new lug nuts
Lug bolts are normally hammered or drawn into place with the use of the wheel. They are removed the same. Remove the wheel, you may have to set the rotor in such a position that allows for the lug removal. Usually a very small gap allows for it. Take a good hammer and carefully pound it in till it pops out the back. Take your new one and push it in than tap it a few times till enough thread is showing that it can be drawn in all the way with the wheel installed.
no you can't in any state it can't be missing
Drill it or have someone do it for you. I had to have two drilled off cause they just wouldn't budge. It cracked the wheel and I had to replace that. My advice is to change your lug nuts every 5 years or so. They get warped from heat, cold, and use.
In Mr. Tire, $65.00 up.
Unless you have a universal 5 lug rim or the power to change 5x100 to 5x114.3.
Loose or broken lug nuts. If the lug nut were installed in reverse they will also come off.
You have to remove the brake drum, force out the broken stud and press fit in a new one.
Remove old lug nuts replace with new one. I recommend buying lug nuts from toyota dealers. OEM lug nuts last longer than aftermarket.
KIA lug nuts are the same as other lug nuts on other car makes. To remove or tighten them, use a standard lug nut wrench or the one found in the trunk of your KIA.
how to change the lug nuts in the front of a 2003 ford focus
You can purchase Lug Adapter/Conversion spacers that will allow you to change Lug number amount, and also Lug Pattern. Check Ebay