Remove old lug nuts replace with new one. I recommend buying lug nuts from toyota dealers. OEM lug nuts last longer than aftermarket.
Lug Nuts? 100 Ft lbs.
how to change the lug nuts in the front of a 2003 ford focus
To change a tire on a Maserati, first ensure the car is on a level surface and engage the parking brake. Use a lug wrench to loosen the lug nuts slightly before lifting the vehicle with a jack. Once elevated, remove the lug nuts completely and take off the flat tire. Replace it with the spare, hand-tighten the lug nuts, lower the vehicle, and then securely tighten the lug nuts in a crisscross pattern.
you crack the lug nuts, jack the van, remove the lug nuts, take wheel off. put the wheel on, thread the lug nuts on, snug them with the tire iron, lower the car, and tighten them to ~140Nm.
Locking lug nuts are just as strong as standard lug nuts, just as long as they are correctly installed with the proper locking lug nut key wrench.
You jack it up and remove the wheel lug nuts, pull the wheel off and fit new one, tighten up lug nuts.
To change the tire on a 2000 Nissan Frontier, first remove the lug nuts on the affected tire. Then, jack that wheel off of the ground. Remove the tire itself and place it aside. Then, place the new tire on the lugs. Add the lug nuts and then lower the vehicle. You can then tighten the lug nuts.
The tire on a Jeep Liberty is changed by loosening the lug nuts, jacking up the vehicle, removing the lug nuts, and taking the tire off. A replacement tire or spare is then place over the wheel studs and the lug nuts tightened down.
loosen the lug nuts with a 19mm wrench. jack up the car. remove the tire. put a new one on. put the lug nuts back on tight enough. lower the car. tighten lug nuts to 90 ft-lbs
center hub should pop off exposing lug nuts , but a couple have come into my shop and there is a screw holding on center hub cap then it lets u see lug nuts.
The torque for the lug nuts on a cat backhoe 426c depend on what size the lug nuts are; for 1/2 lug nuts the torque should be around 80; for 9/16 lug nuts the torque should be around 140.