Assume you mean taillights. Open the trunk, pull back the cover from the taillight, twist the bulb assembly counter-clockwise and the bulb assembly should come out.
Saturn built it ... let them fix it!
Just bring it to the place that you bought the bulb, and they will show you. Buy the bulb at an auto shop.
To change one's back headlight, one must first uncover the light bulb. Then one must unscrew the bulb. One must have another bulb to change the headlight. Screw in the new bulb.
Open the hood as the light bulb pop into the back side of the lens
remove the 2 t15 screws in the taillight remove the assy. turn bulb socket out and replace
If you can't get to the back of the light through the trunk, you have to remove the light to change the bulb from the rear.
To change the third light bulb, just grab onto the case inside the back seat of your car and pull it up and back. The case will pop out and expose the wiring and bulb
from the back you must remove about 4 nuts the i beleave you have to change the hole light not just the bulb
Inside bumper back of it
i need to know what wires need to be disconnected to change tail light assembly on a 92 saturn sl See sources and related links below for bulb information.
Unscrew both screws on trim around light Then unscrew the light Remove bulb Change and then screw back in
Open the hood, get to the back of the light, remove the rubber cover and the light is visible. Turn the light bulb housing and pull the bulb out. Installing is the reverse.