it's very easy only tools necessary is tools to undo bracket holder.
the fuel line has a u shape white plastic clamp on the fuel line, squeeze
the tabs together and push in on the clamp .(you can pull back from the back side)
to pull clamp back about half way and the fuel line will pull off filter.new filter comes with new clamps but i was able to use factory ones, i think they are better. the new filter does not come with end caps so if you have something to plug off filter when you pull the lines off it would be alot less messy since the fuel is going to flow out the filter.also make sure to wear eye protection.I did not have to release the line pressure since my car sat overnight, but did take off fuel cap. replace filer in bracket and push gas line back on push the plastic back down to hold gas line in place you should hear a clicking sound when snapped in place.after installing check for leaks.I don"t know procedure to release pressure from gas line.
Purolator builds a filter that will fit your Mercury. 4 cylinder uses the PL10241 V6 uses the PL24651
According to the 2007 Mercury Mariner Owner Guide ( 5W-20 ) -------------------------------------------------------------------- With engine oil filter change : The 2.3 liter four cylinder engine takes ( 4.5 U.S. quarts ) and the 3.0 liter V6 engine takes ( 6.0 )
According to the 2009 Mercury Mariner Owner Guide : With engine oil filter change : The 2.5 liter four cylinder engine takes ( 5.3 U.S. quarts ) The 3.0 liter V6 engine ( 6.0 ) * 5W-20
Purchase a Purolator Cabin Filter. It comes with detailed instructions.
According to the 2009 Mercury Mariner Owner Guide : With engine oil filter change : The 2.5 liter four cylinder engine takes ( 5.3 U.S. quarts ) The 3.0 liter V6 engine takes ( 6.0 ) * 5W-20
According to the 2008 Mercury Mariner Owner Guide : With engine oil filter change : The 2.3L four cylinder takes ( 4.5 U.S. quarts of 5W-20 ) The 3.0L V6 ( 6.0 quarts of 5W-20 )
According to the 2006 Mercury Mariner Owner Guide : With engine oil filter change : The 2.3 liter four cylinder engine takes ( 4.5 U.S. quarts of 5W-20 ) The 3.0 liter V6 takes ( 6.0 of 5W-20 )
Answer oil capacity for mercury mountioneer with 4.6 v-8 with filter change ========================================================================= According to the 1999 Mercury MOUNTAINEER Owner Guide : With engine oil filter change : The 5.0L V8 engine takes ( 4.7 litres / 5.0 U.S. quarts of 5W-30 )
According to our sources, oil, coolant and fuel capacity for this version of 2007 Mercury Mariner 4WD V-6 are as follows: Engine lubricant oil capacity: 5.7 liter / 6 U.S. qt / 5 imp. qt
On my 1999 Mercury Tracer, the fuel filter is mounted on the firewall. It's on the driver-side, on the passenger-side of the brake cylinder. I don't know how to get my hands in to change it though. Jonathon
When do you change a fueld filter on a 2005 Camry 4 cylinder
4.5 quarts ( 4.25 liters ) with oil filter change - according to the owners manual