there is no alternator on the 1992 Lumina its all electric, so there is no need for one.
How do you convert the ac in a 1992 Chevy lumina
Hopefully you mean a 1992 Lumina, and yes, most starters are standard.
The Chevy lumina does not have an inertia switch.
The engine can be moved forward slightly.
Yes it will, I did the interchange on mine
Remove the cylinder head from your 1992 Chevy 350 cubic inch engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
under the engine
ype your answer here...
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
Where do I find a fuse panel diagram for a 1992 chevy luman
Yes, there is a windshield wiper relay on a 1992 Chevy Lumina. The windshield wiper relay is located in the underhood fuse panel.
Just go to Google and search for '1992 Chevy lumina wiring harness' up will pop 20 or a 1000 places willing to sell you one.
Yes, he did. Dale Sr. drove an all black #3 Chevy Lumina during the 1992 Winston Cup season.
My 1990 Lumina 3.1 had the same problem and it was caused by the crank sensor.
It took 4.3 hours
17 city 26 highway :(
between starter housing & block
Your 1992 Chevy Lumina will run with a bad 02 sensor. The engine will seem to be sluggish and the fuel mileage will go down.
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
I'll assume Lower Intake Gasket, since they tend to cause vacuum leaks. Get a manual from Autozone and expect about 4 hrs labor, you need to take off the upper intake manifold just to replace the Lower Intake Gasket. Probably should change/clean the PCV valve while ur in there. Good luck, man.
You're not gonna find a strainer on that car.
14.3 to 14.6v dc