take of old one put new one on
The estimate to replace/repair the head gasket on a Rover 45 starts at 200 British pounds, plus VAT. As of October 2014, this is equal to $321.45 in US currency.
If you know what your doing a couple hours (head will need skimming) if not take it to a garage
The head gasket itself isn't actually expensive. The labour of taking the head off and back on is the expensive. For example when I did my car it was £60 for the gasket and if I was to go to a garage they would of charged £200 labour.
To change the fuse in a Rover 200, locate the fuse box and the fuse needing changed. Use pliers, pull the fuse out gently and put the new one into place.
it depends, do it yourself or have a shop do it yourself- $200- $500 shop- $1,200- $2,500
cost me $200 for labour and 20 bucks for the gasket and new oil and filter also if the head is warped it will cost extra to machine it
A head gasket itself is only about $15. I live in nebraska and if you were to get it professionaly fixed, it would cost anywhere from 200 to 500 dollars..
it will cost you 200 dollar if do it yourself
where is the speed sensor on a rover 200
I know for a 93 BMW 325is 2.5L DOHC 6chy. You might as well just go a head and buy the head gasket set it runs about 200$ at autozone. It comes with valve cover gasket, valve stem seals, and head gasket. But its also recommended to replace the cylinder head bolts also.
The crankshaft sensor on a Rover 200 is located below and to the right of the generator and cylinder head temperature sensor. It is on the driver's side of the engine and above the oil filter.
might cost 100-200