Look at you owners manual or they just have a bulb that unscrews counter clockwise
one 1/4 turn if you are just changing the bulb, Then just rotate 1/4 turn clockwise to install! DO NOT TOUCH THE BULBS!
If you are changing the entire unit there are 3 bolts that hold the light housing on remove them and it just slides out forward!
Open the hood. There are three hex head bolts that hold each headlamp to the van. Remove each bolt and gently pull headlamp out from grill using the small handle-like grip. The headlamp will remain connected to the van with the lightbulb socket. Twist the collar away from the bulb then pull the bulb assembly out of the headlamp. Replace bulbs and reassemble components.
What to do if you have a problem with the brakes on the Town and Country van
Remove the wiring harness from the back of your 1999 Chevy Astro headlamp. Remove the headlamp retaining bolts. The headlamp will come out. Reverse the process to install the new headlamp.
open hood.....Look inside where the headlight is located. you should see a connector. rotate it counterclockwise and it should release. Once out you'll see the bulb. turn it counterclockwise and replace it. reverse for installation
The headlamp unit on an Astra van is changed by removing the wiring harness, unbolting the assembly, and lifting it from the vehicle. A new unit can then be put into place and bolted in.
I've included a link to a how to video below that will show you exactly how to change the front wheel bearing hub on your 1996-2007 Chrysler Town & Country van. Hope this helps you out.
1999 Chrysler town country van the ligth is on the air bag
I had mine changed out in an hour, that includes draining the fluids.
Which model of chrysler van? Resubmit the question with make, MODEL and year.
A 1997 Chrysler Town and Country does not have a band.
No.
the town and country. It is a van