To change the headlight bulb on your 1986 Celebrity:
1. Take out the screws and remove the headlight door.
2. Remove the screws and take out the retainer that holds the bulb in place.
3. Pull the headlamp bulb out enough to unplug the wires.
Install the new bulb in the reverse order.
Does your 1986 Chevy Celebrity have the 2.5L 4 cylinder engine or the 2.8L V6?
I found one source that says a 1986 Chevy Celebrity has a curb weight of 2714 pounds. Different options would change that weight.
The spark plug gap for a 1986 Chevy Celebrity with the 2.5L 4 cyl engine is .060".
According to my 1986 Chevy Celebrity factory service manual the choke relay is in the "convenience center" and plugs in. The "convenience center" it behind the headlight switch and behind the instrument cluster. It appears to me that it would be less than easy to get to. Some convenience.
To change the front blinker bulb on your 1986 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
If it is a 2.8 it has 2
A couple of possible reasons why your headlights don't light up: 1. Both headlights are burned out. 2. The headlight switch has gone bad. 3. There is a wiring problem.
To change the headlight on a 1985 Honda Spree scooter remove the headlight housing. The scooter headlight will be mounting on the rear of the housing. Remove it and replace the bulb.
Replace the seat belt.
Please clarify your question as in front or rear axle.
On the V6 the ignition module is under the distributor cap.
These are typically easy to changed first take off the pulley then you will have access to the bolts they behind the pulley