I have a 2004 endeavor, it might be the same set up. You can try it, Pop open the hood. Their is a gray cap that holds the light in place on each side, located right behind the headlight. You need to turn it to get the cap off. Then the light is clipped in it so you need to press in the tabs to release the light. Snap in the other light and put the cap on but the cap is spring loaded so it is tricky to get on. I found that by using just a little pressure it will go on easier then pushing it full force on to the other piece, it will take a couple trys. Be careful not to touch the glass on the bulb, Good luck, hope it helped!
How do you disable the DRLs on a 2005 Mitsubishi Endeavor?
You can program a blank key for Mitsubishi Endeavor 2006 using Transponder Key Blank Fits.
Six
Check the fuses.
Front and middle spark plug.
i have 2006 endeavor changing brakes do i have to remove the two screws in the rotor to remove so i can have resurfaced
The Endeavor has a big, beefy timing belt. It can last a very long time but to be safe 105,000 miles is a good benchmark for changing it.
T
If there is one installed it should be behind the glove box. It is sitting on top of the blower inside the blower box
how to change number 6 spark plug on a 2006 mitsubishi galant
2006 Mitsubishi Outlander headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Mitsubishi i was created in 2006.