Want this question answered?
with ur hands
The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
preferrably bring it to the dealer, but if you really want to do it yourself, you have to remove the front bumper. its a pain
Carry it to dealer who will replace on low beam headlight for $15 +/- dollars in about 5 minutes.
Begin by removing the wiring harness from the back of your 1989 Silverado headlight assembly. Remove the low beam headlight assembly retaining bolts. Reverse the process to install your new low beam headlight.
please answer the question
YES.....
You can access the low beam headlight bulb from the engine compartment. Push the bulb holder in and turn. The bulb will come out.
To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.
Pull the headlight control knob towards you with the low beam headlight or park light position selected
headlight bulbs changed,dimmer swich changed,headlight swich changed.key off headlight work low ,key on goes to brights. unpluged harness check ok at first ,but after a few try hi beam indictor would not go to low m-beam