Want this question answered?
The 1992 Acura Integra master window switch is interchangeable with other 1992 models. The master window switch was used in all 1991 through 1994 models.
The driver side electric window switch on a 1992 Acura Integra is reached by removing the door panel. Unbolt the switch from the mounting bracket and disconnect the wiring from the harness. Replace the unit.
how do i fix the rear passenger window of my acura mdx
it sounds to me like the switch is bad i had a Mercedes with the same problem it would go down but not back up and i finally replaced the window switch and now it works fine
Remove the retaining ring at the top of your 1991 Acura Legend ignition switch. The ignition switch cylinder will slide out. Remove the wiring harness from the end of the ignition cylinder. Reverse the process to install your new ignition switch cylinder.
no a Philips screw driver and a 10mm socket
Disconnect fluid linesRemove mounting boltsSlide cylinder out of booster REMEMBER TO BENCH BLEED NEW MASTER CYLINDER PRIOR TO INSTALLATION
You will need to change the brake light switch. The brake light switch can be found below the dashboard on the drivers side.
How do you change transmission in a acura legend?
99 acura Ti
The fan switch on a 1995 Acura Integra is located on the dashboard. It is a part of the temperature control system.
The 1989 Acura Legend radiator fan switch can be found on the inside of the quarter panel. You can find the switch on the drivers side quarter panel.