# Release hood latch and open hood. # Disconnect and isolate the battery negative cable # Hoist and support vehicle on safety stands. # Remove nut holding B+ terminal to starter solenoid # Disconnect solenoid connector from starter. # Remove bolts holding starter to transaxle bellhousing # Remove starter from bellhousing # Separate starter spacer from transaxle bellhousing. == # Place starter spacer in position on transaxle bellhousing, flange toward flywheel. # Place starter in position on bellhousing. # Install bolts to hold starter to transaxle bellhousing. # Connect solenoid connector into starter. # Install nut to hold B+ terminal to starter solenoid. # Lower vehicle. # Connect battery negative cable. # Verify starter operation.
It could be your starter, or your starter solenoid.
where is the starter located on a 1998 dodge grand caravan *Added* All starters will be located on the flywheel, transmission housing, Usually on the bottom side of the engine. Its a large cylinder with a smaller cylinder on it, akathe Starter and starter solenoid.
93 dodge caravan starter changedisconnect battery, then underneath at the front mount disconnect wires if possible, if not, remove after removing starter. three bolts and starter comes out. one bolt is slightly hidden. opposite to install.
On the radiator side of the engine.
Starter solenoid is on the starter, trans solenoid is on the trans.
What steps are involved in changing an alternator on a 2002 dodge grand caravan?
Disconnect battery, remove wires off of starter remembering where they go, then loosen two nuts holding the starter . Reverse to re connect/install
Front of the engine, at oil pan level.
Front of the engine, at oil pan level.
On the front of the engine, at oil pan height
I forgot to add that the motor in this 94 Dodge Grand Caravan ES is a 3.3L
what size allen wrench do i need to change front brakes on a 2004 dodge grand caravan